Amendement N° Contract Ref. Description File
A2017-01 Appendix 2 & 11
In Appendix 11 point 4.2, a measure is provided for under Remark 2. This remark can be deleted from Appendix 11 because Appendix 11 contains a description of the markings and signs on wagons, not actions to be taken.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-02 Appendix 9
Define what is meant in Appendix 9 by "Detach wagon" as an action to be taken in a separate point 3.2.5 / 3.2.6, Action to be taken "Detach wagon", column (4); Definition".
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-03 Appendix 11
Add a marking on wagons with screw brakes to indicate the holding force available, as stipulated by UIC Leaflet 545, point 4.2.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-04 Appendix 9
New code 1.8.4: Hard manganese wear plate on axle box
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-05 Appendix 9
Adapt wording of Annex 8, point 4 as regards the use of derailment detectors.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-06 Appendix 9
Under Code 3.3.5.2, the action to be taken should be to affix a "K" label and rectify the problem. Code 3.3.5.2 should then foresee the further action "detach wagon" in cases where rectification is not possible. Merely affixing a "K" label is not sufficient for this defect.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-07 Appendix 9
The action to be taken and the defect category under Code 5.9.1 both need to be modified since a long-stroke damper which is off-centre can foul the loading gauge.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-08 Appendix 11
GCU Appendix 11 currently contains only one warning sign for high voltage (a lightning flash). This amendment proposes to include in GCU Appendix 11 the other warning sign for high voltage, as set out in DIN EN 15877-1:2012-12.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-09 Appendix 9
In order to reduce noise, various train formation yards with gravity humps apply friction modifiers to the inner and outer faces of the wagon wheel. The application of such products is not a reason to detach wagons, and should be included under Code 1.3.7 as an exception.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-10 Appendix 9
Annex 1, code 8.1: additional handling of the wagon following irregularities in operations: No need for a three-point measurement of the wheelset on wagons having sustained an "abnormal buffering shock" (irregularities in operations).
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-11 Appendix 11
A specific marking/pictogram is required on railway recess wagons suitable to carry semi-trailers with steering wedges.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-12 Appendix 9
Adapt the wording of points 1.2 and 4.4, "Planning of tests". In the context of multilateral RU-RU relations and the further enhancement of the QMS, the wording of Appendix 9, points 1.2 and 4.4 (main text on QMS) needs to be revised.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-13 Appendix 9
Addition concerning removable wagon components: trestle locking device
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-14 Appendix 10, Art 3.20
Broken or missing brake release pulls are to be replaced.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-15 Appendix 7, Part B
Remove the outmoded term "U part" and insert a list of standard spare parts
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-16 Appendix 7, Model HR
Adjust Form HR in line with the new Appendix 10
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-17 Appendix 10, Art 4.14
Adapt the provisions on damage to side bearers and, in particular, their fastening, in line with the new Appendix 9
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-18 Appendix 10, 1.6.1, 1.6.2 and 1.18
Ensure that the rules governing composite brake blocks (LL) are applied to wheelsets on wagons fitted with LL blocks during every trip to the workshop.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-19 Appendix 10, Chapter C
Align "Chapter C - Preventive maintenance" with (EU) Regulation 445/2011
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-20 Appendix 10, Annex 3, Art 2.2
Since EN 473 ceased to apply on 1.3.2013, the current reference should be replaced by a reference to EN ISO 9712.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-21 Appendix 6 & Article 23.2
Amendment of Appendix 6  and to propose a compensation payment of 350€.
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018
A2017-22 Appendix 8
Overhault of Appendix 8
Amendment proposal sent:
30.06.2017
End of voting period:
30.09.2017
Adoption of Proposal:
unanimous
Notification re-adoption sent:
03-10-2017
Entering into force:
01-01-2018